Blizzard: Ventana overhead
Galvanized steel tilting frame for glass block
White galvanized steel tilting frame for 240x240x80 mm
White galvanized steel tilting frame for glass blocks of 190x190x80 mm
The tilting windows Blizzard of Future Euro Trade are manufactured in galvanized steel, blank lacquered and they are easy and practical to use.
Among the main characteristics we highlight that of obtaining a rapid ventilation of environments where they are installed and therefore a better air recirculation and with the considerable advantage, if used with glass bricks, not interrupting the design and continuity of the wall itself thanks to the fact that the frame is specifically designed to contain the same bricks glass. The opening can be regulated manually through the special mechanism supplied, thanks to this system the Blizzard windows for glass blocks also allow them to be used in heights that are not normally accessible, always guaranteeing their use and subsequent closure without using stairs.
Because of this particularity, for example, Blizzard windows are highly demanded in the predes of the stairs of several floors, in garages, basements, bathrooms and in all those rooms that require ventilation through small openings on the walls, but without Never forget aesthetic appearance, practicality and security.
Blizzard windows are available in six sizes, three modular with glass blocks of 190x190x80 mm and three for glass blocks of 240x240x80 mm.
Assembly instructions
Folding windows, projected for environments ventilation, can contain one, two or four glass bricks (19x19x8 cm format.). The opening system is horizontal tilting and glass blocks must be installed on walls with dimension joints not less than 16 mm.
- Introduce the bricks into the frame removing the lower band of the part that opens (only for those with one and two elements).
- Place the frame on a smooth surface and fill with mortar the joints obtained by separating the bricks between them with wooden cribs.
- Install the opening handle lifting the metal tabs located on the side of the folding frame.
- Enter the handle before the frame is installed to avoid moving from the correct position, opening involuntarily.
- Once the mortar is hardened, install the racks as the wall installation is installed.
- Enter the window with the horizontal tilting opening axis and the opening handle located in the upper part to facilitate its closure by gravity and avoid water infiltrations.
