Prefabricated concrete and glass panels with horizontal and vertical development

Concrete panel + glass block

The continuous search for new solutions and installation systems of glass blocks has led us to develop an important technical collaboration with a specialized partner in the prefabricated sector of concrete and in the creation of glass block panels of small, medium and large size.

The prefabrication with glass block allows the creation of custom walls, soils and ceilings and therefore the application on facades, partitions, horizontal panels and being able to propose quick and aesthetically perfect solutions in all finishes.

All these applications, thanks to the careful attention to detail by our partner and combined with the versatility of the materials, offer a broad, complete and customizable creativity potential.

Standard panels allow building a Glass block wall o o Small partition quickly and efficiently, providing a perfect finish.

Thanks to the use of hydrophugated cements mixed with resins, it is possible to obtain and guarantee high quality panels and time resistance to wear and atmospheric agents.

It doesn't matter if your project are straight or curved walls, small, medium or large, see us with confidence and without compromise, infringers of the dimensions and characteristics of the walls to be carried out and in a short time we will inform you. In detail about the realization, times and costs of your project.

Assembly instructions

Precautions before installation
Make sure the space reserved to place the panel meets the following conditions:

Clean and flat support in its base.
Verticality of the walls.
Planning of the walls.

Panel support
The panel should be fixed with the appropriate systems supplied on both opposite sides, preferably always in the direction of the largest size. The anchor of both sides increase strength and security.

The opening of the wall hole should be at least 3 cm greater than the panel size to be installed.
The panel is fixed with fixing anchor (Fisher type), respecting the dilation.

Sealing
The pond is guaranteed by applying silicone throughout the perimeter of the panel, after introducing a polyethylene cord at the bottom of the joints as recommended by the usual standards.